DS 8



DAYLIFF DS submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.

MOTOR
The pump is coupled to a sealed liquid cooled 2-pole asynchronous squirrel cage motor constructed from stainless steel. The motor requires a remote starter and if unstable supply voltage is likely, an additional quick tripping control relay is recommended. Note that due to low starting torques of submersible motors, it is recommended that DOL starters are used for all motor sizes.

Enclosure Class: IP68
Insulation Class: F
Speed:2900rpm

OPERATING CONDITIONS
Pumped Liquid: Thin, clean chemically non-aggressive liquids without solid particles or fibres.
Max. Liquid Temperature: +30°C
Max. Water Depth: 200m - 4", 300m - 6"
Min. Borehole Diameter: 110mm - 4" motor, 150mm-6" motor (DS8/66 only)

PUMP DATA

Model Motor Dia ('') Motor Full Load Current (A) Start Current (A) Dimensions (mm) Weight (kg)
A B C
kW HP 1x240 3x415 1x240 3x415 1x240 3x415 1x240 3x415 1x240 3x415
DS 8/10 4 1.5 2 11 4.4 41 19 1015 970 393 348 622 20 27
DS 8/15 4 2.2 3 16 5.9 50 26 1245 1225 413 393 832 23 34
DS 8/25 4 4 5.5 - 10 - 56 - 1866 - 614 1252 - 64
DS 8/30 4 5.5 7.5 - 14 - 70 - 2160 - 698 1462 - 68
DS 8/37 4 5.5 7.5 - 14 - 70 - 2437 - 684 1753 - 74
DS 8/44 4 7.5 10 - 17.4 - 84 - 2848 - 778 2070 - 84
DS 8/50 4 7.5 10 - 17.4 - 84 - 3067 - 764 2303 - 88
DS 8/66 6 11 15 - 26 - 125 - 4130 - 730 3400 - 120