Pedrollo 4SR6 submersible pumps are specifically designed for domestic and small scale water supply from boreholes, though can also be used in other submersible applications in either vertical or horizontal configuration. They feature a hydraulic design that incorporates floating impellers which together with especially resistant component materials provide high resistance to sand content in the pumped water.

The pump impellers and diffusers are made from engineering plastic while the stage casings, top housing, suction connector, pump sleeve and shaft are made of AISI 304 stainless steel. The pump is supplied with a 1.5m tail cable.

Pumps are coupled to a  two pole sealed motor constructed principally from stainless steel. A  separate control box is also included for single phase pumps which incorporates a fused rotary switch, run indicator light, thermal overload with manual reset and capacitor which can be connected directly to the mains power supply. 3 phase motors require a remote starter and if irregular electrical supply is prevalent an additional quick tripping voltage sensing relay is recommended.

Enclosure Class : IP68
Insulation  Class: F
Speed: 2900rpm


Pumped Liquid: Thin, clean, chemically non aggressive liquids with a maximum sand content of 150gm/m3.
Max. Liquid Temperature: +30°C.
Min. Borehole Diameter: 110 mm 
Max. Immersion Depth: 200m 


Model Power(kW) Current (A) DN(") Dimensions (mm) Weight (kg)
kW HP 1x240V 3x415V H1 H2
4SR6/9-S 1.1 1.5 8 3.0 2 446 371 14
4SR6/13-S 1.5 2 11 5.0 598 396 16
4SR6/17-S 2.2 3 15 6.0 723 437 20
4SR6/24-S 3 4   7.0 969 450 24
4SR6/32-S 4 5.5   9.0 1247 505 29
4SR6/43-S 5.5 7.5   12.0 1618 590 37
4SR6/58-S 7.5 10   16 2161 800 52