Pedrollo 4SR1 submersible pumps are specifically designed for domestic and small scale water supply from boreholes, though can also be used in other submersible applications in either vertical or horizontal configuration. They feature a hydraulic design that incorporates floating impellers which together with especially resistant component materials provide high resistance to sand content in the pumped water.

The pump impellers and diffusers are made from engineering plastic while the stage casings, top housing, suction connector, pump sleeve and shaft are made of AISI 304 stainless steel. The pump is supplied with a 1.5m tail cable.

Pumps are coupled to a two pole sealed motor constructed principally from stainless steel. A separate control box is also included for single phase pumps which incorporates a fused rotary switch, run indicator light, thermal overload with manual reset and capacitor which can be connected directly to the mains power supply. 3 phase motors require a remote starter and if irregular electrical supply is prevalent an additional quick tripping voltage sensing relay is recommended.

Enclosure Class : IP68
Insulation Class: F
Speed: 2900rpm

Pumped Liquid: Thin, clean, chemically non aggressive liquids with a maximum sand content of 150gm/m.
Max. Liquid Temperature: +300C.
Min. Borehole Diameter: 110 mm
Max. Immersion Depth: 200 m


Model Power(kW) Current (A) DN(") Dimensions (mm) Weight (kg)
1x240V 3x415V H1 H2
4SR1/13 0.37 3.1   11/4 400 311 11
4SR1/18 0.55 4.2   517 331 13
4SR1/25 0.75 6.4   646 356 16
4SR1/45 1.5 10.8 4.4 1065 436 24