Grundfos CRE 1-15 1.5kW Pump
Available
Quality Multistage Pump
Available
Quality Multistage Pump
Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. The pump is fitted with a 1-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status:
|
Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption".
The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required:
|
Controls: | ||
Frequency converter: | Built-in | |
Pressure sensor: | No | |
Liquid: | ||
Pumped liquid: | Water | |
Liquid temperature range: | -20 .. 120 °C | |
Selected liquid temperature: | 20 °C | |
Density at selected liquid temperature: | 998.2 kg/m³ | |
Technical: | ||
Pump speed on which pump data are based: | 3350 rpm | |
Rated flow: | 2.2 m³/h |
Features