Back to Main Site
  • Pedrollo CPm130

Pedrollo CPm130

Available

Quality Booster Pump

Manufactured by Pedrollo

The PEDROLLO CP range are non self-priming closed impeller pumps with integral motors. They are efficient, quiet and rated for continuous duty making them suitable for water boosting and transfer in a variety of domestic, industrial and agricultural applications. They are also particularly suited to automatic pressurised supply using either a surge tank or 'Presscontrol' unit. Pump construction material is cast iron for the casing and brass alloy for impellers except Cpm130 which uses techno plastic and CPm150 which uses stainless steel.

MOTOR
Pumps are close coupled to a Pedrollo brushless TEFC induction motor designed for continuous operation. Single phase motors are provided with a thermal cutout in the windings to protect against electric and mechanical overload and can be connected directly to the mains power supply through a 10Amp fuse or MCB. Three phase motors require remote DOL starter protection according to local regulations.

Read More

Key Features

  • Pedrollo logo inserted in the body pump
  • Quiet operation due to the anti vibration system between shaft and impeller
  • More compact
  • More efficient motor with low energy consumption and lower operating temperature.
  • Special paint which gives improved resistance against environmental corrosion
  • Longer life
Read More

KSh 17,100

Pedrollo CPm130 is Manufactured by Pedrollo

MPESA, Airtel Money, VISA & MasterCard

Delivery is within 0 - 2 days

Warranty - 24 Months

The PEDROLLO CP range are non self-priming closed impeller pumps with integral motors. They are efficient, quiet and rated for continuous duty making them suitable for water boosting and transfer in a variety of domestic, industrial and agricultural applications. They are also particularly suited to automatic pressurised supply using either a surge tank or 'Presscontrol' unit. Pump construction material is cast iron for the casing and brass alloy for impellers except Cpm130 which uses techno plastic and CPm150 which uses stainless steel.

MOTOR
Pumps are close coupled to a Pedrollo brushless TEFC induction motor designed for continuous operation. Single phase motors are provided with a thermal cutout in the windings to protect against electric and mechanical overload and can be connected directly to the mains power supply through a 10Amp fuse or MCB. Three phase motors require remote DOL starter protection according to local regulations.

Motor
Enclosure Class IP44
Voltage 1 X 240V
Insulation Class F
Speed 2900rpm
Operating Conditions
Pumped Liquid Thin, clean, chemically non aggressive liquids without abrasive particles or fibres
Maximum Fluid Temperature +40C
Maximum Ambient Temperature +40C
Maximum Suction Lift 7m (at sea level)
Pump Information
Model CPm130
Power (kW) 0.37
Maximum Operating Current (A) 2.5
Dimensions (mm) - DN1 1"
Dimensions (mm) - DN2 1"
Dimension(mm) A 540
Dimension(mm) B 225
Dimension(mm) C 570
Dimensions (mm) - L 259
Dimensions (mm) - H 205
Dimensions (mm) - H1 82
Dimensions (mm) - W 135
Weight (kg) 15.5
  • Pedrollo logo inserted in the body pump
  • Quiet operation due to the anti vibration system between shaft and impeller
  • More compact
  • More efficient motor with low energy consumption and lower operating temperature.
  • Special paint which gives improved resistance against environmental corrosion
  • Longer life

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: pumps, water pumps, cheap pumps, efficient pumps, booster pumps, electric