SP2A



GRUNDFOS SP submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor.

Standard pumps are designed for the pumping of non-aggressive water. 'N and R' versions are available for applications requiring a higher degree of corrosion resistance.

All SP pumps carry a drinking water approval and meet European Minimum Efficiency Index guidelines

Motor
The pump is coupled to a sealed, liquid cooled 2-pole asynchronous squirrel-cage GRUNDFOS motor constructed of stainless steel. Single phase motors are supplied complete with purpose designed control boxes, while three phase motors require a remote Direct-on-Line starter. If unstable supply voltage is likely an additional quick tripping control relay is recommended.

Enclosure Class: IP58
Insulation Class: B
Speed: 2900rpm

Operating Conditions
Pumped Liquid: Thin, clean, chemically non-aggressive liquids without solid particles or fibres.
Max Liquid Temperature: +40°C.
Max Water Depth: Up to 1.5kW 1ph and 2.2kW 3ph - 150m, 2.2kW 1ph and 3kW 3ph - 600 m
Minimum Borehole Diameter: 110mm

PUMP DATA

Model Motor Full Load Current (A) Start current (A) Dimensions (mm) Weight (kg)
A B C
KW HP 1x240V 3x415V 1x240V 3x415V 1x240V 3x415V 1x240V 3x415V 1x240V 3x415V
SP 2A-9 0.37 0.5 3.8   13   600   256   344 11  
SP 2A-13 0.55 0.75 5.5   19   719   291   428 13  
SP 2A-18 0.75 1 7   26   839   306   533 15  
SP 2A-23 1.1 1.5 7.1 3.7 31 16 984 944 346 306 638 17 16
SP 2A-33 1.5 2 9.8 4.4 38 21 1190 1190 346 346 844 20 19
SP 2A-48 2.2 3 14 5.7 62 26 1781 1554 573 346 1208 39 30
SP 2A-65 3 4   8.1   35   2058   493 1565   41

Documents / Downloads

Choose Pump by Usage / Application

Find the BEST solution for your installation based on your select requirement.