SP215



GRUNDFOS SP submersible pumps are designed specifically for borehole supply applications. They are of multistage centrifugal impeller design and all parts are made from stainless steel with water lubricated rubber bearings. A submersible motor is fitted beneath the pump and suction is effected through a strainer between the pump and motor. Standard pumps are designed for the pumping of non-aggressive water. 'N and R' versions are available for applications requiring a higher degree of corrosion resistance.

All SP pumps carry a drinking water approval and meet European Minimum Efficiency Index guidelines

MOTOR
The pump is coupled to a sealed, liquid cooled 2-pole asynchronous GRUNDFOS motor constructed of stainless steel with ceramic bearings. All motors are also fitted with a built-in sensor which monitors running temperatures. When fitted with the patented GRUNDFOS MP 204 control unit protection is provided against dry running, mechanical motor defects, excessive motor running temperature and irregular power supply. The fitting of MP204unit is recommended for motor control and monitoring and also extended motor life.

Note that irrespective of the fitting of MP 204 control unit a remote starter is required. Due to the low starting torques of submersible motors it is recommended that Direct-on-Line starters are used on motor sizes up to 22kW. Motors above this size should use a soft start arrangement.

Enclosure Class: IP58
Insulation Class: F
Voltage: 3x415V
Speed: 2900rpm

OPERATING CONDITIOS

Pumped Liquid: Thin, clean chemically non-aggressive liquids without solid particles or fibres.
Max. Liquid Temperature: +40°C
Max. Water Depth: 600m
Min. Borehole Diameter: 254mm - MMS8000, 254mm - MMS8000, 268mm - MMS10000, 300mm - MMS12000

PUMP DATA

Model Motor Full Load Current (A) Istart/I Motor Dimensions (mm) Weight (kg)
kW HP A B C D E*
SP 215-2 45 60 96 6 MMS8000 2236 1270 966 192 241 228
SP 215-4 75 100 152 5.8 MMS8000 2908 1590 1318 192 241 308
SP 215-6 110 147 222 5.8 MMS8000 3730 2060 1670 192 241 424
SP 215-8 147 196 320 6.7 MMS10000 4392 2070 2322 237 247 622
SP 215-10 190 253 395 6.7 MMS12000 4654 1980 2674 286 276 793

 

E* = Maximum diameter of the pump inclusive of cable guard and motor

Documents / Downloads