DAYLIFF SUNFLO series submersible pumps are designed for reliable small-scale water supply from boreholes and wells and are the ideal solution for remote pumping requirements in livestock watering, irrigation and general water supply applications. They are of positive displacement three-chamber diaphragm design and can run dry without damage. An internal bypass is also incorporated to prevent pump damage in the event of delivery cut-off.
Pump components are manufactured from high quality engineering plastics with santoprene used for the diaphragm and EPDM for the valves. Pump casings are plastic for 150 and stainless steel for 300 and a 50-mesh stainless steel screen is also incorporated.
Pumps can be installed either with a direct connection to the PV module or through a charge controller that is connected to a battery for 24hr operation.
Pump output curves are given at standard test conditions of 1000W/m2 solar irradiance and 250C. Output will vary throughout the year depending upon prevailing irradiation levels. For estimated daily outputs at continuous pumping multiply the indicated output at the duty point by the daily irradiation given in Graph 1. For indicative purposesfactors of 1.1 can be applied for hot arid areas and 0.9 for temperate high altitude areas in East Africa. Output will vary throughout the day as a proportion of the estimated hourly irradiation as shown in Graph 2.
The pump motor is of permanent magnet type for 24V DC power input from either a direct source or photovoltaic modules. Internal thermal protection is also provided.
Pumped Liquid: Thin, clean, chemically non-aggressive liquids without solid particles.
Max. Liquid Temperature: +770C
Ambient Temperature: -400C-+600C
Max. Immersion Depth: 30m
Internal by-pass Pressure: 7.5bar
||Input Power (W)